top of page

custom fit guide

RIDE88 QR3 Racks have options to fit in just about any truck bed. Find information here to get the best fitting system for your truck.

Step 1

Locate your cargo mounting holes. Most trucks will have them close behind the cab (see photo). If you have oblong holes like on Chevy and Ram trucks our racks will fit. The oversized pressure plates on both ends of the crossbar will press around the hole and provide firm stability.

NO HOLES?

Go down to "OTHER OPTIONS"

measure1.JPG
measure2.JPG

Step 2

Measure from one side of the bed to the other right at the mounting hole location (see photo). Write down the measurement.

Step 3

Determine which QR3 KIT will fit your truck:

  • QR3 A-KIT 64.5"-69.5" inches

  • QR3 B-KIT 60"-65" inches

  • QR3 C-KIT 55"-60" inches

 

Pro Tip: Order the longest option that will fit your bed width.

If you accidentally order a little too long it's OK, you can cut off some length on the non adjusting end of the crossbar. Lowes and other hardware stores can do this for you in the pipe department, usually at no charge.

select kit

QR3 A,B,C KITS

other options

QR3-HANGER KIT

UNIVERSAL FIT SYSTEM

This universal fit system will fit any truck with a traditional bed construction. Will not work on trucks that do not have space between the bed and cab.

DSC_4100.JPG

U-track option

U-TRACK KIT

This system requires holes in the front wall of your truck for mounting the U-Track. Some trucks like Chevy and GMC already have holes. Others will require drilling 3 small 3/8" holes. This is a great rack solution that adds a useful utility track system your vehicle as well.